Zero Wall Manual Recliner Mechanism (4311)

Zero wall manual recliner mechanism 4311

1. Profile shape designed for safety and appearance without pinch point.

2. Articulating design allows use of wider and higher mid ottoman for elimination of entrapment areas and for leg support.

3. Occupant's weight used to balance operation instead of springs. Therefore, the opening, closing, ottoman firmness, and back balance while reclining vary with the weight of the occupant making the operation consistent from one person to the next. Springs are used for locking and the initial start of the opening.

4. Occupant's weight opens chair, handle/lever only unlocks mechanism. Slight foot rest pressure closes ottoman.

5. Square drive tube connects to and controls both left and right sides. Ottoman is locked closed on both sides.

6. Improved weight capacity and durability (250 pound occupant weight).

7. Mechanism base width is closer to seat width while maintaining sufficient clearance between links to eliminate possibility of interference.

8. Eliminates problems with flexing and breaking of tube end at bend. Flange is on heavy gauge link instead of the lighter gauge tube which can flex and break.

9. Unique design of flattened tube end maximizes torsion strength unlike non-tubular cross members which have no significant torsion strength.

10. All rivet joints have either acetal or bronze bushings and acetal spacers to eliminate any steel to steel contact. No metal to metal noises when links contact stop pins.

This is our hot product.